What's wrong with my garage door?

Pick what your door is doing, or tap a part on the drawing, to see which part it points to and the signs that it's failing. Quotes are free, and we're open 24/7.

What's your door doing?

Tap a number on the drawing, or pick a part by name, to see what it does and the signs that it's failing.

All the parts

  1. Opener

    The motor on the ceiling, with a rail running toward the door.

    An opener that won't work isn't always a broken opener. We check the opener, the remotes and keypad, the safety sensors and the door itself.

    Signs of trouble

    • The remote or keypad stopped working. The trouble can be in the remote or keypad, or in the opener itself.
    • The door goes back up before it closes.
  2. Springs

    On the bar above the closed door (torsion springs), or along the side tracks (extension springs).

    The springs carry the door's weight, not the opener.

    Signs of trouble

    • A loud bang from the garage. Afterward the door won't open, or it feels extremely heavy.
    • A gap of a few inches in the coil of the spring above the door.
    • Rust on the spring.

    Don't run the opener, don't lift the door by hand, and don't try to wind, unwind or replace a spring yourself.

  3. Cables and drums

    A cable runs down each side of the door, from the drum at the end of the spring bar to the bracket at the bottom corner.

    The cables and the brackets at the bottom of the door work against the springs' tension.

    Signs of trouble

    • A frayed or broken cable.
    • The door hangs or closes crooked.

    Leave the door where it is, don't run the opener, and keep people and cars clear.

  4. Tracks

    The metal rails on both sides of the door. They curve at the top and run back along the ceiling.

    The door's rollers run in the tracks as it opens and closes.

    Signs of trouble

    • The door came off its track.
    • A bent track, for example after a storm.

    Don't push the door back into its track and don't run the opener. A door off its track can fall.

  5. Rollers and hinges

    Hinges join the door's sections. The rollers sit at the ends of the sections and run in the tracks.

    Signs of trouble

    • The door is louder than it used to be. Worn rollers, dry hinges and loose hardware often get louder before they fail.
    • The door closes at an angle or jumps its rollers. Stop using it and leave it where it is.
  6. Door sections

    The panels that make up the door itself.

    Signs of trouble

    • A dented or damaged panel. A badly dented panel may need a new section, or a new door.
    • Storm damage: dents, or a door pushed out of line.

The drawing shows a typical sectional door with torsion springs. It is not to scale, and your door may differ.

Get your free quote

Your name and a phone number or email are all we need; nothing else is required. A phone number is the quickest way for us to reach you.

Loading the request form.

Form not loading? Open it on Jobber's site, or call us.

Open the request form

Or call now: (941) 413-1422

Next step

Ready to get your door fixed?

Call for the fastest answer, or send a few details and we'll get back to you.